Criteria | Supporting Features | Remarks (e.g., definition, equivalent facilitation, scope of support provided) |
1.1.1 Non-text Content: All non-text content thatis presented to the user has a text alternative that serves theequivalent purpose, except for the situations listed below. (Level A) - Controls, Input: Ifnon-text content is a control or accepts user input, then it has a namethat describes its purpose. (Refer to Guideline 4.1 for additionalrequirements for controls and content that accepts user input.)
- Time-Based Media: Ifnon-text content is time-based media, then text alternatives at leastprovide descriptive identification of the non-text content. (Refer toGuideline 1.2 for additional requirements for media.)
- Test: Ifnon-text content is a test or exercise that would be invalid ifpresented in text, then text alternatives at least provide descriptiveidentification of the non-text content.
- Sensory: Ifnon-text content is primarily intended to create a specific sensoryexperience, then text alternatives at least provide descriptiveidentification of the non-text content.
- CAPTCHA: If the purpose of non-textcontent is to confirm that content is being accessed by a person ratherthan a computer, then text alternatives that identify and describe thepurpose of the non-text content are provided, and alternative forms ofCAPTCHA using output modes for different types of sensory perceptionare provided to accommodate different disabilities.
- Decoration, Formatting, Invisible: Ifnon-text content is pure decoration, is used only for visualformatting, or is not presented to users, then it is implemented in away that it can be ignored by assistive technology.
| Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Images that convey information have meaningful alternative text using ALT
- Images that are decorative are marked up using ALT=”” or CSS background images
- Titles for Objects are provided
- Controls have an associated name
- There is no use of time-based media
- Client-side image maps specify the ALT attribute on each element.
- Non-text characters are not used or have meaningful alternative text
- CAPTCHAs are not used
|
1.2.1 Audio-only and Video-only (Prerecorded): For prerecorded audio-only and prerecorded video-only media, the following are true, except when the audio or video is a media alternative for text and is clearly labeled as such: (Level A)Prerecorded Audio-only: An alternative for time-based media is provided that presents equivalent information for prerecorded audio-only content. Prerecorded Video-only: Either an alternative for time-based media or an audio track is provided that presents equivalent information for prerecorded video-only content.
| Product has been developed to conform to this standard subject to the remarks on the right. | No pre-recorded audio or video is used. |
1.2.2 Captions (Prerecorded): Captions are provided for all prerecorded audio content in synchronized media, except when the media is a media alternative for text and is clearlylabeled as such. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | No pre-recorded audio or video is used. |
1.2.3 Audio Description or Media Alternative (Prerecorded): An alternative for time-based media or audio description of the prerecorded video content is provided for synchronized media, except when the media is a media alternative for text and is clearly labeled as such. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | No pre-recorded audio or video is used. |
1.2.4 Captions (Live): Captions are provided for all live audio content in synchronized media. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | No live audio content is used |
1.2.5 Audio Description (Prerecorded): Audio description is provided for all prerecorded video content in synchronized media. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | No pre-recorded video is used |
1.3.1 Info and Relationships: Information, structure, and relationships conveyed through presentation can be programmatically determined or are available in text. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - User interface component labels are associated with the fields they are labeling
- Headings are encoded with HTML heading tags
- Table markup is used for marking up data tables, including row and column headers and table captions/summaries where appropriate
- Data tables specify SUMMARY or CAPTION
- Hierarchical text structures available via screen reader and similar accessibility tools.
- Hierarchical navigation structures function (e.g. multi-level tab navigation).
- Hierarchical presentation of tree data structures.
Exceptions: - Navigation bar options are recognized as single isolated radio buttons rather than a related set of options (“radio button, not selected, one of one” - Bug ID: 25831781)
|
1.3.2 Meaningful Sequence:When the sequence in which content is presented affects its meaning, a correct reading sequence can be programmatically determined. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - The sequence of elements in the DOM matches a logical reading sequence.
|
1.3.3 Sensory Characteristics:Instructions provided for understanding and operating content do not rely solely on sensory characteristics of components such as shape, size, visual location, orientation, or sound. (Level A) Note:For requirements related to color, refer to Guideline 1.4. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Instructions provided do not refer to things solely based on their sensory characteristics such as shape, size, visual location, orientation, color, or sound
- Instructions provided which refer to graphics included a reference to the text alternative of the graphic
|
1.4.1 Use of Color:Color is not used as the only visual means of conveying information, indicating an action, prompting a response, or distinguishing a visual element. (Level A) Note:This success criterion addresses color perception specifically. Other forms of perception are covered in Guideline 1.3 including programmatic access to color and other visual presentation coding. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Alternative means used for conveying color-related information.
- Color coded information is presented in conjunction with either text or symbols which convey the meaning independently from the color used.
|
1.4.2 Audio Control:If any audio on a Web page plays automatically for more than 3 seconds, either a mechanism is available to pause or stop the audio, or a mechanism is available to control audio volume independently from the overall system volume level. (Level A) Note:Since any content that does not meet this success criterion can interfere with a user's ability to use the whole page, all content on the Web page (whether or not it is used to meet other success criteria) must meet this success criterion. See Conformance Requirement 5: Non-Interference. | Product has been developed to conform to this standard subject to the remarks on the right. | No audio or video used in the product. |
1.4.3 Contrast (Minimum):The visual presentation of text and images of text has a contrast ratio of at least 4.5:1, except for the following: (Level AA)
- Large Text:Large-scale text and images of large-scale text have a contrast ratio of at least 3:1;
- Incidental:Text or images of text that are part of an inactive user interface component, that are pure decoration, that are not visible to anyone, or that are part of a picture that contains significant other visual content, have no contrast requirement.
- Logotypes:Text that is part of a logo or brand name has no minimum contrast requirement.
| Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Large-scale text and images of large-scale text have a contrast ratio of at least 3:1
- Other text and images of text have a contrast ratio of at least 4.5:1
Exceptions: - The footer elements for “Copyright” and “About…” do not meet the contrast requirement (Bug ID: 25226898)
|
1.4.4 Resize text:Except for captions and images of text, text can be resized without assistive technology up to 200 percent without loss of content or functionality. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Text can be resized up to 200% without loss of content or functionality.
|
1.4.5 Images of Text:If the technologies being used can achieve the visual presentation, text is used to convey information rather than images of text except for the following: (Level AA)- Customizable:The image of text can be visually customized to the user's requirements;
- Essential:A particular presentation of text is essential to the information being conveyed.
Note:Logotypes (text that is part of a logo or brand name) are considered essential. | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Images of text are only used when the technology can't create the desired visual presentation, the image can be customized or the particular image is essential.
|
2.1.1 Keyboard:All functionality of the content is operable through a keyboard interface without requiring specific timings for individual keystrokes, except where the underlying function requires input that depends on the path of the user's movement and not just the endpoints. (Level A) Note 1:This exception relates to the underlying function, not the input technique. For example, if using handwriting to enter text, the input technique (handwriting) requires path-dependent input but the underlying function (text input) does not. Note 2:This does not forbid and should not discourage providing mouse input or other input methods in addition to keyboard operation. | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Tab order through the product's controls and selectable elements
- Use of keyboard to perform selection and actions, without requiring specific timing
Exceptions: - Within the navigation bar, tab order can change dynamically depending on selected elements and previous keystrokes. Details for this are included at the beginning of this document under "Navigation Bar – Mouse or Keyboard-Only Usage Issues" (Bug ID: 25226547)
|
2.1.2 No Keyboard Trap:If keyboard focus can be moved to a component of the page using a keyboard interface, then focus can be moved away from that component using only a keyboard interface, and, if it requires more than unmodified arrow or tab keys or other standard exit methods, the user is advised of the method for moving focus away. (Level A) Note:Since any content that does not meet this success criterion can interfere with a user's ability to use the whole page, all content on the Web page (whether it is used to meet other success criteria or not) must meet this success criterion. See Conformance Requirement 5: Non-Interference. | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Movement of focus through each control only using the keyboard, with no "keyboard trap" that prevents focus from moving away from any control
|
2.2.1 Timing Adjustable:For each time limit that is set by the content, at least one of the following is true: (Level A)
- Turn off:The user is allowed to turn off the time limit before encountering it; or
- Adjust:The user is allowed to adjust the time limit before encountering it over a wide range that is at least ten times the length of the default setting; or
- Extend:The user is warned before time expires and given at least 20 seconds to extend the time limit with a simple action (for example, "press the space bar"), and the user is allowed to extend the time limit at least ten times; or
- Real-time Exception:The time limit is a required part of a real-time event (for example, an auction), and no alternative to the time limit is possible; or
- Essential Exception:The time limit is essential and extending it would invalidate the activity; or
- 20 Hour Exception:The time limit is longer than 20 hours.
Note:This success criterion helps ensure that users can complete tasks without unexpected changes in content or context that are a result of a time limit. This success criterion should be considered in conjunction with Success Criterion 3.2.1, which puts limits on changes of content or context as a result of user action. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for and uses the following in various locations: - The user is allowed to adjust the time limit before encountering it over a wide range that is at least ten times the length of the default setting.
- The time limit is essential and extending it would invalidate the activity.
- The time limit is longer than 20 hours.
|
2.2.2 Pause, Stop, Hide:For moving, blinking, scrolling, or auto-updating information, all of the following are true: (Level A)
- Moving, blinking, scrolling:For any moving, blinking or scrolling information that (1) starts automatically, (2) lasts more than five seconds, and (3) is presented in parallel with other content, there is a mechanism for the user to pause, stop, or hide it unless the movement, blinking, or scrolling is part of an activity where it is essential; and
- Auto-updating:For any auto-updating information that (1) starts automatically and (2) is presented in parallel with other content, there is a mechanism for the user to pause, stop, or hide it or to control the frequency of the update unless the auto-updating is part of an activity where it is essential.
Note 1:For requirements related to flickering or flashing content, refer to Guideline 2.3. Note 2:Since any content that does not meet this success criterion can interfere with a user's ability to use the whole page, all content on the Web page (whether it is used to meet other success criteria or not) must meet this success criterion. See Conformance Requirement 5: Non-Interference. Note 3:Content that is updated periodically by software or that is streamed to the user agent is not required to preserve or present information that is generated or received between the initiation of the pause and resuming presentation, as this may not be technically possible, and in many situations could be misleading to do so. Note 4:An animation that occurs as part of a preload phase or similar situation can be considered essential if interaction cannot occur during that phase for all users and if not indicating progress could confuse users or cause them to think that content was frozen or broken. | Product has been developed to conform to this standard subject to the remarks on the right. | The product contains the following instance of animation: - Status indicator - The status indicator supports alternate text to indicate the state as busy or idle. It remains in motion as long as the state is busy (which can exceed three seconds). This animation is essential as the indicator's sole purpose is to provide momentary dynamic feedback regarding the status of an operation. As such it can not be paused or stopped.
|
2.3.1 Three Flashes or Below Threshold:Web pages do not contain anything that flashes more than three times in any one second period, or the flash is below the general flash and red flash thresholds. (Level A) Note:Since any content that does not meet this success criterion can interfere with a user's ability to use the whole page, all content on the Web page (whether it is used to meet other success criteria or not) must meet this success criterion. See Conformance Requirement 5: Non-Interference. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - No portion of the screen flickers or flashes with a frequency between 2Hz and 55Hz
|
2.4.1 Bypass Blocks:A mechanism is available to bypass blocks of content that are repeated on multiple Web pages. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Header markup is used for getting to the main content on a screen. This provides a bypass of repetitive screen content.
|
2.4.2 Page Titled:Web pages have titles that describe topic or purpose. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Meaningful titles for pages and content panes are provided.
|
2.4.3 Focus Order:If a Web page can be navigated sequentially and the navigation sequences affect meaning or operation, focusable components receive focus in an order that preserves meaning and operability. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Logical movement through the focusable components using only the keyboard, in an order that follows a meaningful sequence
Exceptions: - Within the navigation bar, tab order can change dynamically depending on selected elements and previous keystrokes. Details for this are included at the beginning of this document under "Navigation Bar – Mouse or Keyboard-Only Usage Issues" (Bug ID: 25226547)
|
2.4.4 Link Purpose (In Context):The purpose of each link can be determined from the link text alone or from the link text together with its programmatically determined link context, except where the purpose of the link would be ambiguous to users in general. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Links are meaningful from the text of the link alone, or from underlying or alternate text.
|
2.4.5 Multiple Ways:More than one way is available to locate a Web page within a set of Web pages except where the Web Page is the result of, or a step in, a process. (Level AA) | Does not Support | The product was tested for: - Navigation bar for hierarchical access
- Tabs to access multiple panes on each content area.
- Buttons to access varied content within a tab pane.
The product does not provide: - Multiple ways to locate a page within a set of web pages (Bug ID: 25831828)
|
2.4.6 Headings and Labels:Headings and labels describe topic or purpose. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Headings and labels are meaningful and descriptive of the page or sub-context which they precede.
|
2.4.7 Focus Visible:Any keyboard operable user interface has a mode of operation where the keyboard focus indicator is visible. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Visual cue or feedback to the position of the cursor within the product
- Cursor focus is programmatically exposed
|
3.1.1 Language of Page:The default human language of each Web page can be programmatically determined. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - The "lang" attribute is properly set for each HTML page, and
- The human language conforms to that set for the platform (OS) or the host system (programmatically determinable from that system).
|
3.1.2 Language of Parts:The human language of each passage or phrase in the content can be programmatically determined except for proper names, technical terms, words of indeterminate language, and words or phrases that have become part of the vernacular of the immediately surrounding text. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - No passages or phrases that differ in language from the page/screen as a whole, and
- The "lang" attribute is correctly set for each screen, and
- The human language used will be that selected for the platform (OS) on which the product runs (programmatically determinable from that system).
|
3.2.1 On Focus:When any component receives focus, it does not initiate a change of context. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - When an element receives focus, it does not result in a substantial change to the page, an additional change of keyboard focus, or the spawning of other components/windows aside from element-related hovertext.
|
3.2.2 On Input:Changing the setting of any user interface component does not automatically cause a change of context unless the user has been advised of the behavior before using the component. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product has been tested for: - No use of user interface components for which a change in setting results in change of context
|
3.2.3 Consistent Navigation:Navigational mechanisms that are repeated on multiple Web pages within a set of Web pages occur in the same relative order each time they are repeated, unless a change is initiated by the user. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Ordering of navigational elements remains constant unless a change is initiated by the user.
Exceptions: - Within the navigation bar, tab order can change dynamically depending on selected elements and previous keystrokes. Details for this are included at the beginning of this document under "Navigation Bar – Mouse or Keyboard-Only Usage Issues" (Bug ID: 25226547)
|
3.2.4 Consistent Identification:Components that have the same functionality within a set of Web pages are identified consistently. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Images and controls are used and identified consistently throughout the product.
|
3.3.1 Error Identification:If an input error is automatically detected, the item that is in error is identified and the error is described to the user in text. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | Wherever possible, the product prevents the user from inputting invalid values. When that is not possible (e.g. a value may be valid or invalid, varying based on other factors), the input error is presented and described in textual form. |
3.3.2 Labels or Instructions:Labels or instructions are provided when content requires user input. (Level A) | Product has been developed to conform to this standard subject to the remarks on the right. | This product was tested for: - Labels or instructions are provided when the product requires user input
|
3.3.3 Error Suggestion:If an input error is automatically detected and suggestions for correction are known, then the suggestions are provided to the user, unless it would jeopardize the security or purpose of the content. (Level AA) | Product has been developed to conform to this standard subject to the remarks on the right. | The error text informs the user of the root cause of the error, allowing them to submit input which does not suffer from that same cause. |
3.3.4 Error Prevention (Legal, Financial, Data):For Web pages that cause legal commitments or financial transactions for the user to occur, that modify or delete user-controllable data in data storage systems, or that submit user test responses, at least one of the following is true: (Level AA)
- Reversible:Submissions are reversible.
- Checked:Data entered by the user is checked for input errors and the user is provided an opportunity to correct them.
- Confirmed:A mechanism is available for reviewing, confirming, and correcting information before finalizing the submission.
| Product has been developed to conform to this standard subject to the remarks on the right. | No legal, financial, or user-data commitments, modifications, or deletions are made by this product. No user test responses are submitted by this product. |
4.1.1 Parsing:In content implemented using markup languages, elements have complete start and end tags, elements are nested according to their specifications, elements do not contain duplicate attributes, and any IDs are unique, except where the specifications allow these features. (Level A) Note:Start and end tags that are missing a critical character in their formation, such as a closing angle bracket or a mismatched attribute value quotation mark are not complete. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Pages validate to the HTML specification
|
4.1.2 Name, Role, Value:For all user interface components (including but not limited to: form elements, links and components generated by scripts), the name and role can be programmatically determined; states, properties, and values that can be set by the user can be programmatically set; and notification of changes to these items is available to user agents, including assistive technologies. (Level A) Note:This success criterion is primarily for Web authors who develop or script their own user interface components. For example, standard HTML controls already meet this success criterion when used according to specification. | Product has been developed to conform to this standard subject to the remarks on the right. | The product was tested for: - Components have a programmatically associated name, derived from the appropriate HTML elements and attributes including LABEL, TITLE, SUMMARY, CAPTION, etc.
- Additional state information is programmatically exposed, such as whether a field is required or changed.
|