Oracle Server X7-8, Oracle’s latest server capable of both four-socket and eight-socket configurations, is the newest addition to Oracle’s family of x86 servers that are purpose-built to be best for running Oracle Database. Oracle Server X7-8 is a 5U server that is an ideal platform for Oracle Database In-Memory due to its large memory capacity and bandwidth. With its unmatched serviceability and reliability features, along with state-of-the-art security in depth, Oracle Server X7-8 is an enterprise-class system capable of even the most extreme workloads.

The intent of the power calculator is to provide guidance for estimating the electrical and heat loads for typical operating conditions. It should not be used to calculate power or HVAC requirements. Instead, please use the appropriate site planning guide to allow for proper allowances.

Notices and Disclaimers
  • Note: JavaScript must be enabled to view this section of the website.
  • Configure your Oracle Server X7-8 and calculate your system's total power consumption.

Oracle Server X7-8 Power Calculator

Item Quantity Notes
Processor
Select Processor Type
CPUs
Select Number of CPUs
Memory
(64GB DIMM)
Select number of DIMMs
Memory
(32GB DIMM)
Select number of DIMMs
Memory
(16GB DIMM)
Select number of DIMMs
Hard Disk Drives (2.5-inch)
Select number of Hard Drives
Solid-State Drives (2.5-inch)
Select number of Solid-State Drives
PCI-Express Card
Select number of PCI-Express Cards
Indicate Workload (%):
Select Workload range
(1% - 100%)
   

Sample Results

Item Active Idle Power Sample Power
Total Power of System (Watts) (estimated) (estimated)
Total Power of System (BTU/HR) (estimated) (estimated)

Notices and Disclaimers

You MUST allow electrical and cooling headroom for unforeseen circumstances, component upgrades, and increased computational loads. Please allow for worst-case power conditions. Actual power consumption will vary from the sample workload used in the power calculator. These include, but are not limited to, the factors below. Each of these factors may cause significant differences in power consumption:

  • Actual workload and its fluctuations
  • Ambient temperature
  • Cooling patterns
  • Excessive inlet temperature
  • Humidity
  • Operating systems features
  • Power management settings

The "Sample Power" results shown (if using 100% workload) represent server power consumption measurements with CPUs at 100% utilization running SPECjbb2005. HPC workloads may consume more power than the commercial workload used in this calculator. If shown for this calculator, the "Active Idle Power" results represent power consumption measurements taken from servers with operating systems booted and stabilized, yet running at minimal utilization. Sample results shown are representative of measurements taken with room temperatures below 25°C. System power can vary depending upon hardware/software configurations and environmental conditions. For precise results, actual measurements based upon the exact hardware/software/environmental conditions are recommended.

Legal Notice: This calculator is subject to change without notice and is provided "as is" without warranty of any kind, express or implied. Oracle does not make any representations regarding the use, validity, accuracy or reliability of the tool. The entire risk arising out of the use of this tool remains solely with the customer. In no event shall Oracle be liable for any direct, consequential, incidental, special, punitive or other damages, even if Oracle is negligent or has been advised of the possibility of such damages, arising from use of the tool or the information provided herein.

Get Started
 
Contact
 
Follow Us
 
Share