HCL for Oracle Solaris OS

Submit Hardware | Return to Previous Page
Send Feedback to the HCL team
 
Detail
Type: Server System
Manufacturer: IBM
Model: BladeCenter HS22V (7871)
Support: Solaris Premier Subscription  available on Certified Systems
Runs on OS Versions: Oracle Solaris 11 11/11    Reported to Work
Oracle Solaris 10 10/09 to Oracle Solaris 10 1/13    Certified
CPU Type: Intel Xeon CPU X5670@2.93GH
Num CPUs: 2
Num Cores (per CPU): 6
BIOS/UEFI:
 Firmware Maker and Version
See General Notes
BIOS/UEFI:
Non-Standard Settings
See General Notes
Test Suite: true
(May not apply to all OS Revisions. Please refer to 'General Notes')
General Notes: This blade server is certified on a BCHT chassis on Solaris 10 10/09
CPU: dual 6-core Intel Xeon CPU X5670 @ 2.93GHz
LSI 1064E SAS controller in a RAID 0 configuration
Patches: 144487-03 is required for the 42C1830 CNA N/W ports to work.
Bios/Firmware Maker and Version: IBM -UEFI: [P9E148AUS-1.09] IMM: YUOO73M
Chipset: Intel 5520
Certified with the following option cards:
IBM 42C1830 Qlogic 2 port 10 GB converged CFFh card (Network controller)
IBM 44X1945 Qlogic 8 GB Fiber channel CIOv expansion card (Network controller)
the network driver is supplied by the OS

Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net
is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port
-----------------------------------------------------------------------------------

This blade server is certified on a BCH chassis Onboard LSI 1064E SAS controller in a RAID 0 configuration
Bios/Firmware Maker and Version: IBM -UEFI: [P9E146CUS-1.08] IMM: YUOO57H 04/26/2010
Certified with the following option cards:
IBM 44W4475 port CIOv daughter card (Network controller)
IBM 44W4479 2/4 port daughter card (Network controller)

Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port
Submitter Company: Oracle America, Inc.
Last Updated: 2011-05-23

'prtconf -pv' Output Information

PCI Information: [+] Show

View the prtconf information submitted. You can see the PCI information parsed out as well.
Open 'prtconf -pv' in separate window.