To Perform the Transfer Mode Test

Before You Begin

To test whether the WiFi card supports various transfer modes, you must have the following prerequisites.

• One or more APs that support all the transfer modes. The 802.11b, 802.11g, 802.11a, and 802.11n standards are commonly supported by the target card and the Oracle Solaris OS.

• One machine that is set up as a TM.

• AP must be correctly connected to the TM machine.

1. Set up the AP.

   Set up the AP to work in one of the transfer modes commonly supported by the target card and the Oracle Solaris OS.

2. Enable the DHCP server capability of the AP.
3. Reboot the Oracle Solaris OS on the SUT and start the Oracle HCTS UI.
4. Enable the DHCP Network global option.
5. Perform the WiFi certification test.
6. Change the transfer mode of the AP.

   Change the transfer mode of the AP to the next one that is commonly supported by the target card and the Oracle Solaris OS. Alternately, change to another AP that supports a different transfer mode.

7. Repeat Step 2 to Step 4 until all the transfer modes commonly supported by the target card and the Oracle Solaris OS are tested.

Expected Result

WiFi certification test passes on all the transfer modes tested.